ILFA puts new V-Bond system into operation

Published by f.schwarz on

The V-Bond system is loaded fully automatically by our LHMT handling devices

Our new V-Bond system significantly reduces the amount of manual handling required for multilayer PCBs. This also increases our capacity and quality in production. Before the pressing process begins, the materials are coated with an adhesion promoter as homogeneously as possible. This results in optimum adhesion of the prepreg and adhesive to the inner or outer layers of our multilayer PCBs. The V-Bond system was installed by Viking Test, Europe’s most comprehensive supplier of PCB equipment.

Operating concept and access to the system are ergonomically designed
Once the bonding agent has been applied, it goes straight to pressing
Categories: Technologie
Tags:

Related Posts

Technologie

ILFA commissions RMV 125/6 lamination centre from LAUFFER

It is another important milestone in our modernisation offensive: with the commissioning of our new lamination centre from LAUFFER Pressen, we are tripling our lamination capacities in one fell swoop. The RMV 125/6 lamination centre forms the new heart of our multilayer department.

Technologie

Technologies and processes at ILFA: High-frequency printed circuit board with four flex layers

One of our current projects is intended for use as a high-frequency application. The requirements are correspondingly high, which, in addition to high-frequency suitability, envisage a rigid-flex PCB design with four flexible layers. The via fill and backdrilling processes are also used.

Technologie

Technologies and processes at ILFA: Sophisticated HDI design in PCB production

The requirement for high circuit densities in combination with short signal paths and low space requirements can be realised in PCB production with so-called HDI PCBs. HDI stands for "High Density Interconnect" and, as a relatively new technology, plays an important role for ILFA GmbH in the fulfilment of demanding customer requirements. In the following article, we present a sequential structure with 6 electrical layers. The customer requirement included 50 µm line/space on all layers, in combination with 300 µm BGA pitch on the outer layers, as well as a smallest pad diameter of 150 µm.